70 research outputs found
Laserwire at the Accelerator Test Facility 2 with Sub-Micrometre Resolution
A laserwire transverse electron beam size measurement system has been
developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK.
Special electron beam optics were developed to create an approximately 1 x 100
{\mu}m (vertical x horizontal) electron beam at the laserwire location, which
was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The
precise characterisation of the laser propagation allows the non-Gaussian
transverse profiles of the electron beam caused by the laser divergence to be
deconvolved. A minimum vertical electron beam size of 1.07 0.06 (stat.)
0.05 (sys.) {\mu}m was measured. A vertically focussing quadrupole just
before the laserwire was varied whilst making laserwire measurements and the
projected vertical emittance was measured to be 82.56 3.04 pm rad.Comment: 17 pages, 26 figures, submitted to Phys. Rev. ST Accel. Beam
Simulation of a radiobiology facility for the Centre for the Clinical Application of Particles
The Centre for the Clinical Application of Particles’ Laser-hybrid Accelerator for Radiobiological Applications (LhARA) facility is being studied and requires simulation of novel accelerator components (such as the Gabor lens capture system), detector simulation and simulation of the ion beam interaction with cells. The first stage of LhARA will provide protons up to 15 MeV for in vitro studies. The second stage of LhARA will use a fixed-field accelerator to increase the energy of the particles to allow in vivo studies with protons and in vitro studies with heavier ions. BDSIM, a Geant4 based accelerator simulation tool, has been used to perform particle tracking simulations to verify the beam optics design done by BeamOptics and these show good agreement. Design parameters were defined based on an EPOCH simulation of the laser source and a series of mono-energetic input beams were generated from this by BDSIM. The tracking results show the large angular spread of the input beam (0.2 rad) can be transported with a transmission of almost 100% whilst keeping divergence at the end station very low (<0.1 mrad). The legacy of LhARA will be the demonstration of technologies that could drive a step-change in the provision of proton and light ion therapy (i.e. a laser source coupled to a Gabor lens capture and a fixed-field accelerator), and a system capable of delivering a comprehensive set of experimental data that can be used to enhance the clinical application of proton and light ion therapy
The Forward Physics Facility at the High-Luminosity LHC
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe standard model (SM) processes and search for physics beyond the standard model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential
The trigger and data acquisition system of the FASER experiment
Abstract The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500–1000 Hz of other particles originating from the ATLAS interaction point. A very high efficiency trigger and data acquisition system is required to ensure that the physics events of interest will be recorded. This paper describes the trigger and data acquisition system of the FASER experiment and presents performance results of the system acquired during initial commissioning.</jats:p
Gamma Factory at CERN – novel research tools made of light
We discuss the possibility of creating novel research tools by producing and
storing highly relativistic beams of highly ionised atoms in the CERN
accelerator complex, and by exciting their atomic degrees of freedom with
lasers to produce high-energy photon beams. Intensity of such photon beams
would be by several orders of magnitude higher than offered by the presently
operating light sources, in the particularly interesting gamma-ray energy
domain of 0.1-400 MeV. In this energy range, the high-intensity photon beams
can be used to produce secondary beams of polarised electrons, polarised
positrons, polarised muons, neutrinos, neutrons and radioactive ions. New
research opportunities in a wide domain of fundamental and applied physics can
be opened by the Gamma Factory scientific programme based on the above primary
and secondary beams.Comment: 12 pages; presented by W. Placzek at the XXV Cracow Epiphany
Conference on Advances in Heavy Ion Physics, 8-11 January 2019, Cracow,
Polan
- …